WebAIM - Web Accessibility In Mind

E-mail List Archives

Thread: VPAT version for AODA

for

Number of posts in this thread: 9 (In chronological order)

From: Sudheer Babu
Date: Tue, Mar 24 2020 4:41AM
Subject: VPAT version for AODA
No previous message | Next message →

Hi all,

Can someone please point me to the VPAT document used for AODA standards
web application.
The application also has some PDFs included in it.
So will the WCAG version works ? Or we have anything else ? Please advise.

Thanks
Sudheer

From: Lisa Snider
Date: Tue, Mar 24 2020 4:47AM
Subject: Re: VPAT version for AODA
← Previous message | Next message →

Hi Sudheer,

Currently, the AODA Information and Communications Standard is based on WCAG. So the regular VPAT will do for it. However, look for the ICS Review that hasnt been put into the final revised version (phase 2 particularly)... the government may or may not accept that Review.

Cheers

Lisa

Sent from my iPhone

> On Mar 24, 2020, at 7:41 AM, Sudheer Babu < = EMAIL ADDRESS REMOVED = > wrote:
>
> Hi all,
>
> Can someone please point me to the VPAT document used for AODA standards
> web application.
> The application also has some PDFs included in it.
> So will the WCAG version works ? Or we have anything else ? Please advise.
>
> Thanks
> Sudheer
> > > >

From: Sudheer Babu
Date: Tue, Mar 24 2020 5:18AM
Subject: Re: VPAT version for AODA
← Previous message | Next message →

Thanks for the quick reply Lisa!
For WCAG version how do we map to the PDF checkpoints?
Is there a separate version for documents?

Thanks,
Sudheer




On Tue, Mar 24, 2020, 4:17 PM Lisa Snider < = EMAIL ADDRESS REMOVED = > wrote:

> Hi Sudheer,
>
> Currently, the AODA Information and Communications Standard is based on
> WCAG. So the regular VPAT will do for it. However, look for the ICS Review
> that hasnt been put into the final revised version (phase 2
> particularly)... the government may or may not accept that Review.
>
> Cheers
>
> Lisa
>
> Sent from my iPhone
>
> > On Mar 24, 2020, at 7:41 AM, Sudheer Babu < = EMAIL ADDRESS REMOVED = > wrote:
> >
> > Hi all,
> >
> > Can someone please point me to the VPAT document used for AODA standards
> > web application.
> > The application also has some PDFs included in it.
> > So will the WCAG version works ? Or we have anything else ? Please
> advise.
> >
> > Thanks
> > Sudheer
> > > > > > > > > > > > >

From: Karlen Communications
Date: Tue, Mar 24 2020 8:13AM
Subject: Re: VPAT version for AODA
← Previous message | Next message →

Here is the W3C PDF Techniques for WCAG
http://www.w3.org/WAI/GL/WCAG20-TECHS/pdf

Cheers, Karen

-----Original Message-----
From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of Sudheer Babu
Sent: Tuesday, March 24, 2020 7:18 AM
To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
Subject: Re: [WebAIM] VPAT version for AODA

Thanks for the quick reply Lisa!
For WCAG version how do we map to the PDF checkpoints?
Is there a separate version for documents?

Thanks,
Sudheer




On Tue, Mar 24, 2020, 4:17 PM Lisa Snider < = EMAIL ADDRESS REMOVED = > wrote:

> Hi Sudheer,
>
> Currently, the AODA Information and Communications Standard is based
> on WCAG. So the regular VPAT will do for it. However, look for the ICS
> Review that hasnt been put into the final revised version (phase 2
> particularly)... the government may or may not accept that Review.
>
> Cheers
>
> Lisa
>
> Sent from my iPhone
>
> > On Mar 24, 2020, at 7:41 AM, Sudheer Babu < = EMAIL ADDRESS REMOVED = > wrote:
> >
> > Hi all,
> >
> > Can someone please point me to the VPAT document used for AODA
> > standards web application.
> > The application also has some PDFs included in it.
> > So will the WCAG version works ? Or we have anything else ? Please
> advise.
> >
> > Thanks
> > Sudheer
> > > > > > archives at http://webaim.org/discussion/archives
> > > > > archives at http://webaim.org/discussion/archives
> >

From: Mitchell Evan
Date: Tue, Mar 24 2020 11:33PM
Subject: Re: VPAT version for AODA
← Previous message | Next message →

Hi Logan,

> I'd like to chime in and state that if this is related to AODA, the City
of Ottawa will not accept a VPAT as it still isn't relevant to us. We have
vendors submit assessments utilizing the WCAG-EM Tool.

I agree the WCAG-EM Report Tool
<https://www.w3.org/WAI/eval/report-tool/#!/ > can produce excellent WCAG
reports, but I'm curious — what aspects of VPAT 2.x
<https://www.itic.org/policy/accessibility/vpat> have been problematic? If
the WCAG section in VPAT hasn't worked well for Ottawa's needs, then I'd
like to understand what's lacking and see if we can get it fixed, either in
the VPAT template itself or in its instructions for vendors.

The WCAG edition of VPAT and the International edition of VPAT might be new
to some folks here. They are meant to help buyers and regulators compare
accessibility reports from different vendors easily, while vendors
shouldn't have to rewrite the same accessibility findings in multiple
report formats.

(Multiple languages, that's another matter.)

Cheers,
Mitchell

Mitchell Evan
+1 (510) 375-6104
= EMAIL ADDRESS REMOVED =
Twitter @mitchellrevan
https://www.linkedin.com/in/mitchellrevan/

-----Original Message-----
> From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of
> Logan Trafford
> Sent: Tuesday, March 24, 2020 2:28 PM
> To: = EMAIL ADDRESS REMOVED =
> Subject: Re: [WebAIM] WebAIM-Forum Digest, Vol 180, Issue 25
>
>
> I'd like to chime in and state that if this is related to AODA, the City
> of Ottawa will not accept a VPAT as it still isn't relevant to us. We have
> vendors submit assessments utilizing the WCAG-EM Tool.
> In terms of PDF, while the legislation only states they need to be WCAG
> 2.0 AA conformant, assuming you consider a PDF as part of the "web content"
> definition, the better standard you should use is PDF U/A, Those
> documents can be validated by using either the free PAC (PDF Accessibility
> Checking
> Tool) or the free CommonLook Validator tool.
>
> Logan Trafford
> Web Accessibility Coordinator
> City of Ottawa
>
>
> On Tue, Mar 24, 2020 at 2:03 PM < = EMAIL ADDRESS REMOVED = >
> wrote:
>
> > Send WebAIM-Forum mailing list submissions to
> > = EMAIL ADDRESS REMOVED =
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://list.webaim.org/mailman/listinfo/webaim-forum
> > or, via email, send a message with subject or body 'help' to
> > = EMAIL ADDRESS REMOVED =
> >
> > You can reach the person managing the list at
> > = EMAIL ADDRESS REMOVED =
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of WebAIM-Forum digest..."
> > Today's Topics:
> >
> > 1. Re: VPAT version for AODA (Lisa Snider)
> > 2. Re: VPAT version for AODA (Sudheer Babu)
> > 3. Re: VPAT version for AODA (Karlen Communications)
> >
> >
> >
> > ---------- Forwarded message ----------
> > From: Lisa Snider < = EMAIL ADDRESS REMOVED = >
> > To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
> > Cc:
> > Bcc:
> > Date: Tue, 24 Mar 2020 07:47:47 -0300
> > Subject: Re: [WebAIM] VPAT version for AODA Hi Sudheer,
> >
> > Currently, the AODA Information and Communications Standard is based
> > on WCAG. So the regular VPAT will do for it. However, look for the ICS
> > Review that hasnt been put into the final revised version (phase 2
> > particularly)... the government may or may not accept that Review.
> >
> > Cheers
> >
> > Lisa
> >
>
> [snip]
>
>

From: Philip Kiff
Date: Wed, Mar 25 2020 1:10PM
Subject: Re: VPAT version for AODA
← Previous message | Next message →

I'm curious about this as well. In fact, I didn't even realize that
there was a VPAT that might theoretically be used to make a claim about
compliance with the AODA or WCAG. I had always thought of the VPAT as
something related to requirements of the US government and Section 508.

Here in Ontario in Canada where the AODA applies, I can't say that I've
EVER seen anyone make reference to a VPAT other than in the context of
compliance with U.S. regulations. But maybe I've just been out of  the
loop on these things?

Lastly, Mitchell, I noticed a couple problems and limitations with the
sample VPAT documents currently available from the ITI site here:
https://www.itic.org/policy/accessibility/vpat

First, these are not formatted using the current MS Word docx file
format? I would recommend updating all files to using current docx
format. A user of such a form can't even run the rudimentary, but still
useful, built-in MS Word accessibility checker without upgrading the
file format to docx.

Second, they contain font sizes that I consider too small to be
considered accessible in a default context (11 point Calibri). I would
recommend reformatting the documents to use a minimum 12-point font
size. Possibly use Legal-size paper (landscape orientation) instead of
Letter-size paper if you want to preserve more space for user input?

Lastly, I'm not sure that Microsoft Word is even the best format for
this kind of file. Is this what everyone in the US is filling in when
they talk about VPATs? It seems to me that this is actually a fillable
form, and as such, especially given the number of tables and use of
subheadings within individual tables, I wonder if these VPAT files might
not be better formatted as accessible PDF forms? Or maybe that is what
you intend consumers of these files to do with them? Regardless, on
first impression, I have to say that they don't immediately  inspire me
to start jumping in to use them for AODA compliance.

I would welcome any corrections or clarifications on all this, however,
as I really don't know hardly anything about VPATs, and that's why I'm
wondering.

With sincere curiosity,

Philip Kiff
D4K Communications

On 2020-03-25 01:33, Mitchell Evan wrote:
> Hi Logan,
>
>> I'd like to chime in and state that if this is related to AODA, the City
> of Ottawa will not accept a VPAT as it still isn't relevant to us. We have
> vendors submit assessments utilizing the WCAG-EM Tool.
>
> I agree the WCAG-EM Report Tool
> <https://www.w3.org/WAI/eval/report-tool/#!/ > can produce excellent WCAG
> reports, but I'm curious — what aspects of VPAT 2.x
> <https://www.itic.org/policy/accessibility/vpat> have been problematic? If
> the WCAG section in VPAT hasn't worked well for Ottawa's needs, then I'd
> like to understand what's lacking and see if we can get it fixed, either in
> the VPAT template itself or in its instructions for vendors.
>
> The WCAG edition of VPAT and the International edition of VPAT might be new
> to some folks here. They are meant to help buyers and regulators compare
> accessibility reports from different vendors easily, while vendors
> shouldn't have to rewrite the same accessibility findings in multiple
> report formats.
>
> (Multiple languages, that's another matter.)
>
> Cheers,
> Mitchell
>
> Mitchell Evan
> +1 (510) 375-6104
> = EMAIL ADDRESS REMOVED =
> Twitter @mitchellrevan
> https://www.linkedin.com/in/mitchellrevan/
>
> -----Original Message-----
>> From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of
>> Logan Trafford
>> Sent: Tuesday, March 24, 2020 2:28 PM
>> To: = EMAIL ADDRESS REMOVED =
>> Subject: Re: [WebAIM] WebAIM-Forum Digest, Vol 180, Issue 25
>>
>>
>> I'd like to chime in and state that if this is related to AODA, the City
>> of Ottawa will not accept a VPAT as it still isn't relevant to us. We have
>> vendors submit assessments utilizing the WCAG-EM Tool.
>> In terms of PDF, while the legislation only states they need to be WCAG
>> 2.0 AA conformant, assuming you consider a PDF as part of the "web content"
>> definition, the better standard you should use is PDF U/A, Those
>> documents can be validated by using either the free PAC (PDF Accessibility
>> Checking
>> Tool) or the free CommonLook Validator tool.
>>
>> Logan Trafford
>> Web Accessibility Coordinator
>> City of Ottawa
>>
>>
>> On Tue, Mar 24, 2020 at 2:03 PM < = EMAIL ADDRESS REMOVED = >
>> wrote:
>>
>>> Send WebAIM-Forum mailing list submissions to
>>> = EMAIL ADDRESS REMOVED =
>>>
>>> To subscribe or unsubscribe via the World Wide Web, visit
>>> http://list.webaim.org/mailman/listinfo/webaim-forum
>>> or, via email, send a message with subject or body 'help' to
>>> = EMAIL ADDRESS REMOVED =
>>>
>>> You can reach the person managing the list at
>>> = EMAIL ADDRESS REMOVED =
>>>
>>> When replying, please edit your Subject line so it is more specific
>>> than "Re: Contents of WebAIM-Forum digest..."
>>> Today's Topics:
>>>
>>> 1. Re: VPAT version for AODA (Lisa Snider)
>>> 2. Re: VPAT version for AODA (Sudheer Babu)
>>> 3. Re: VPAT version for AODA (Karlen Communications)
>>>
>>>
>>>
>>> ---------- Forwarded message ----------
>>> From: Lisa Snider < = EMAIL ADDRESS REMOVED = >
>>> To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
>>> Cc:
>>> Bcc:
>>> Date: Tue, 24 Mar 2020 07:47:47 -0300
>>> Subject: Re: [WebAIM] VPAT version for AODA Hi Sudheer,
>>>
>>> Currently, the AODA Information and Communications Standard is based
>>> on WCAG. So the regular VPAT will do for it. However, look for the ICS
>>> Review that hasnt been put into the final revised version (phase 2
>>> particularly)... the government may or may not accept that Review.
>>>
>>> Cheers
>>>
>>> Lisa
>>>
>> [snip]
>>
>>
> > > >

From: Philip Kiff
Date: Wed, Mar 25 2020 1:17PM
Subject: Re: VPAT version for AODA
← Previous message | Next message →

Errrg. Just a quick follow-up, I noticed that on the page with the link
I sent, there is a note about how these might not be "perfectly
accessible," and that you provide a link to a document to help users
sort through such issues, entitled "Reporting Conformance to ICT
Accessibility Standards":
https://www.itic.org/resources/vpat/ReportingConformancetoICTAccessibilityStandards-July2019.pdf

Unfortunately, when I downloaded that PDF file, I discovered that it is
not a tagged PDF. I would recommend that your team also take the time to
make that PDF accessible in order to help improve the usefulness of your
VPAT offerings.

Still sincerely,

Philip Kiff.

On 2020-03-25 15:10, Philip Kiff wrote:
> I'm curious about this as well. In fact, I didn't even realize that
> there was a VPAT that might theoretically be used to make a claim
> about compliance with the AODA or WCAG. I had always thought of the
> VPAT as something related to requirements of the US government and
> Section 508.
>
> Here in Ontario in Canada where the AODA applies, I can't say that
> I've EVER seen anyone make reference to a VPAT other than in the
> context of compliance with U.S. regulations. But maybe I've just been
> out of  the loop on these things?
>
> Lastly, Mitchell, I noticed a couple problems and limitations with the
> sample VPAT documents currently available from the ITI site here:
> https://www.itic.org/policy/accessibility/vpat
>
> First, these are not formatted using the current MS Word docx file
> format? I would recommend updating all files to using current docx
> format. A user of such a form can't even run the rudimentary, but
> still useful, built-in MS Word accessibility checker without upgrading
> the file format to docx.
>
> Second, they contain font sizes that I consider too small to be
> considered accessible in a default context (11 point Calibri). I would
> recommend reformatting the documents to use a minimum 12-point font
> size. Possibly use Legal-size paper (landscape orientation) instead of
> Letter-size paper if you want to preserve more space for user input?
>
> Lastly, I'm not sure that Microsoft Word is even the best format for
> this kind of file. Is this what everyone in the US is filling in when
> they talk about VPATs? It seems to me that this is actually a fillable
> form, and as such, especially given the number of tables and use of
> subheadings within individual tables, I wonder if these VPAT files
> might not be better formatted as accessible PDF forms? Or maybe that
> is what you intend consumers of these files to do with them?
> Regardless, on first impression, I have to say that they don't
> immediately  inspire me to start jumping in to use them for AODA
> compliance.
>
> I would welcome any corrections or clarifications on all this,
> however, as I really don't know hardly anything about VPATs, and
> that's why I'm wondering.
>
> With sincere curiosity,
>
> Philip Kiff
> D4K Communications
>
> On 2020-03-25 01:33, Mitchell Evan wrote:
>> Hi Logan,
>>
>>>   I'd like to chime in and state that if this is related to AODA,
>>> the City
>> of Ottawa will not accept a VPAT as it still isn't relevant to us. 
>> We have
>> vendors submit assessments utilizing the WCAG-EM Tool.
>>
>> I agree the WCAG-EM Report Tool
>> <https://www.w3.org/WAI/eval/report-tool/#!/ > can produce excellent
>> WCAG
>> reports, but I'm curious — what aspects of VPAT 2.x
>> <https://www.itic.org/policy/accessibility/vpat> have been
>> problematic? If
>> the WCAG section in VPAT hasn't worked well for Ottawa's needs, then I'd
>> like to understand what's lacking and see if we can get it fixed,
>> either in
>> the VPAT template itself or in its instructions for vendors.
>>
>> The WCAG edition of VPAT and the International edition of VPAT might
>> be new
>> to some folks here. They are meant to help buyers and regulators compare
>> accessibility reports from different vendors easily, while vendors
>> shouldn't have to rewrite the same accessibility findings in multiple
>> report formats.
>>
>> (Multiple languages, that's another matter.)
>>
>> Cheers,
>> Mitchell
>>
>> Mitchell Evan
>> +1 (510) 375-6104
>> = EMAIL ADDRESS REMOVED =
>> Twitter @mitchellrevan
>> https://www.linkedin.com/in/mitchellrevan/
>>
>> -----Original Message-----
>>> From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of
>>> Logan Trafford
>>> Sent: Tuesday, March 24, 2020 2:28 PM
>>> To: = EMAIL ADDRESS REMOVED =
>>> Subject: Re: [WebAIM] WebAIM-Forum Digest, Vol 180, Issue 25
>>>
>>>
>>> I'd like to chime in and state that if this is related to AODA, the
>>> City
>>> of Ottawa will not accept a VPAT as it still isn't relevant to us. 
>>> We have
>>> vendors submit assessments utilizing the WCAG-EM Tool.
>>> In terms of PDF, while the legislation only states they need to be WCAG
>>> 2.0 AA conformant, assuming you consider a PDF as part of the "web
>>> content"
>>> definition, the better standard you should use is PDF U/A, Those
>>> documents can be validated by using either the free PAC (PDF
>>> Accessibility
>>> Checking
>>> Tool) or the free CommonLook Validator tool.
>>>
>>> Logan Trafford
>>> Web Accessibility Coordinator
>>> City of Ottawa
>>>
>>>
>>> On Tue, Mar 24, 2020 at 2:03 PM < = EMAIL ADDRESS REMOVED = >
>>> wrote:
>>>
>>>> Send WebAIM-Forum mailing list submissions to
>>>>          = EMAIL ADDRESS REMOVED =
>>>>
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>> http://list.webaim.org/mailman/listinfo/webaim-forum
>>>> or, via email, send a message with subject or body 'help' to
>>>>          = EMAIL ADDRESS REMOVED =
>>>>
>>>> You can reach the person managing the list at
>>>>          = EMAIL ADDRESS REMOVED =
>>>>
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of WebAIM-Forum digest..."
>>>> Today's Topics:
>>>>
>>>>     1. Re: VPAT version for AODA (Lisa Snider)
>>>>     2. Re: VPAT version for AODA (Sudheer Babu)
>>>>     3. Re: VPAT version for AODA (Karlen Communications)
>>>>
>>>>
>>>>
>>>> ---------- Forwarded message ----------
>>>> From: Lisa Snider < = EMAIL ADDRESS REMOVED = >
>>>> To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
>>>> Cc:
>>>> Bcc:
>>>> Date: Tue, 24 Mar 2020 07:47:47 -0300
>>>> Subject: Re: [WebAIM] VPAT version for AODA Hi Sudheer,
>>>>
>>>> Currently, the AODA Information and Communications Standard is based
>>>> on WCAG. So the regular VPAT will do for it. However, look for the ICS
>>>> Review that hasnt been put into the final revised version (phase 2
>>>> particularly)... the government may or may not accept that Review.
>>>>
>>>> Cheers
>>>>
>>>> Lisa
>>>>
>>> [snip]
>>>
>>>
>> >> >> >> > > > >

From: chagnon@pubcom.com
Date: Wed, Mar 25 2020 2:04PM
Subject: Re: VPAT version for AODA
← Previous message | Next message →

I've questioned the validity and usefulness of VPATs.

After all, the V stands for "voluntary." And when using GSA's template, the author can write just about any gibberish or BS they want.

There's no mandated testing or evaluation done by the government; they take the word of the vendor as stated in the VPAT.

And surely no one is surprised that the PDF is not tagged. So many PDFs from "authorities" are not accessible, such as the WCAG and PDF/UA standards from the ISO.

Gah!

— — —
Bevi Chagnon, founder/CEO | = EMAIL ADDRESS REMOVED =
— — —
PubCom: Technologists for Accessible Design + Publishing
consulting ' training ' development ' design ' sec. 508 services
Upcoming classes at www.PubCom.com/classes
— — —
Latest blog-newsletter – Accessibility Tips at www.PubCom.com/blog

-----Original Message-----
From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of Philip Kiff
Sent: Wednesday, March 25, 2020 3:17 PM
To: = EMAIL ADDRESS REMOVED =
Subject: Re: [WebAIM] VPAT version for AODA

Errrg. Just a quick follow-up, I noticed that on the page with the link I sent, there is a note about how these might not be "perfectly accessible," and that you provide a link to a document to help users sort through such issues, entitled "Reporting Conformance to ICT Accessibility Standards":
https://www.itic.org/resources/vpat/ReportingConformancetoICTAccessibilityStandards-July2019.pdf

Unfortunately, when I downloaded that PDF file, I discovered that it is not a tagged PDF. I would recommend that your team also take the time to make that PDF accessible in order to help improve the usefulness of your VPAT offerings.

Still sincerely,

Philip Kiff.

On 2020-03-25 15:10, Philip Kiff wrote:
> I'm curious about this as well. In fact, I didn't even realize that
> there was a VPAT that might theoretically be used to make a claim
> about compliance with the AODA or WCAG. I had always thought of the
> VPAT as something related to requirements of the US government and
> Section 508.
>
> Here in Ontario in Canada where the AODA applies, I can't say that
> I've EVER seen anyone make reference to a VPAT other than in the
> context of compliance with U.S. regulations. But maybe I've just been
> out of the loop on these things?
>
> Lastly, Mitchell, I noticed a couple problems and limitations with the
> sample VPAT documents currently available from the ITI site here:
> https://www.itic.org/policy/accessibility/vpat
>
> First, these are not formatted using the current MS Word docx file
> format? I would recommend updating all files to using current docx
> format. A user of such a form can't even run the rudimentary, but
> still useful, built-in MS Word accessibility checker without upgrading
> the file format to docx.
>
> Second, they contain font sizes that I consider too small to be
> considered accessible in a default context (11 point Calibri). I would
> recommend reformatting the documents to use a minimum 12-point font
> size. Possibly use Legal-size paper (landscape orientation) instead of
> Letter-size paper if you want to preserve more space for user input?
>
> Lastly, I'm not sure that Microsoft Word is even the best format for
> this kind of file. Is this what everyone in the US is filling in when
> they talk about VPATs? It seems to me that this is actually a fillable
> form, and as such, especially given the number of tables and use of
> subheadings within individual tables, I wonder if these VPAT files
> might not be better formatted as accessible PDF forms? Or maybe that
> is what you intend consumers of these files to do with them?
> Regardless, on first impression, I have to say that they don't
> immediately inspire me to start jumping in to use them for AODA
> compliance.
>
> I would welcome any corrections or clarifications on all this,
> however, as I really don't know hardly anything about VPATs, and
> that's why I'm wondering.
>
> With sincere curiosity,
>
> Philip Kiff
> D4K Communications
>
> On 2020-03-25 01:33, Mitchell Evan wrote:
>> Hi Logan,
>>
>>> I'd like to chime in and state that if this is related to AODA,
>>> the City
>> of Ottawa will not accept a VPAT as it still isn't relevant to us. We
>> have vendors submit assessments utilizing the WCAG-EM Tool.
>>
>> I agree the WCAG-EM Report Tool
>> <https://www.w3.org/WAI/eval/report-tool/#!/ > can produce excellent
>> WCAG reports, but I'm curious — what aspects of VPAT 2.x
>> <https://www.itic.org/policy/accessibility/vpat> have been
>> problematic? If the WCAG section in VPAT hasn't worked well for
>> Ottawa's needs, then I'd like to understand what's lacking and see if
>> we can get it fixed, either in the VPAT template itself or in its
>> instructions for vendors.
>>
>> The WCAG edition of VPAT and the International edition of VPAT might
>> be new to some folks here. They are meant to help buyers and
>> regulators compare accessibility reports from different vendors
>> easily, while vendors shouldn't have to rewrite the same
>> accessibility findings in multiple report formats.
>>
>> (Multiple languages, that's another matter.)
>>
>> Cheers,
>> Mitchell
>>
>> Mitchell Evan
>> +1 (510) 375-6104
>> = EMAIL ADDRESS REMOVED =
>> Twitter @mitchellrevan
>> https://www.linkedin.com/in/mitchellrevan/
>>
>> -----Original Message-----
>>> From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf
>>> Of Logan Trafford
>>> Sent: Tuesday, March 24, 2020 2:28 PM
>>> To: = EMAIL ADDRESS REMOVED =
>>> Subject: Re: [WebAIM] WebAIM-Forum Digest, Vol 180, Issue 25
>>>
>>>
>>> I'd like to chime in and state that if this is related to AODA, the
>>> City of Ottawa will not accept a VPAT as it still isn't relevant to
>>> us.
>>> We have
>>> vendors submit assessments utilizing the WCAG-EM Tool.
>>> In terms of PDF, while the legislation only states they need to be
>>> WCAG
>>> 2.0 AA conformant, assuming you consider a PDF as part of the "web
>>> content"
>>> definition, the better standard you should use is PDF U/A, Those
>>> documents can be validated by using either the free PAC (PDF
>>> Accessibility Checking
>>> Tool) or the free CommonLook Validator tool.
>>>
>>> Logan Trafford
>>> Web Accessibility Coordinator
>>> City of Ottawa
>>>
>>>
>>> On Tue, Mar 24, 2020 at 2:03 PM
>>> < = EMAIL ADDRESS REMOVED = >
>>> wrote:
>>>
>>>> Send WebAIM-Forum mailing list submissions to
>>>> = EMAIL ADDRESS REMOVED =
>>>>
>>>> To subscribe or unsubscribe via the World Wide Web, visit
>>>> http://list.webaim.org/mailman/listinfo/webaim-forum
>>>> or, via email, send a message with subject or body 'help' to
>>>> = EMAIL ADDRESS REMOVED =
>>>>
>>>> You can reach the person managing the list at
>>>> = EMAIL ADDRESS REMOVED =
>>>>
>>>> When replying, please edit your Subject line so it is more specific
>>>> than "Re: Contents of WebAIM-Forum digest..."
>>>> Today's Topics:
>>>>
>>>> 1. Re: VPAT version for AODA (Lisa Snider)
>>>> 2. Re: VPAT version for AODA (Sudheer Babu)
>>>> 3. Re: VPAT version for AODA (Karlen Communications)
>>>>
>>>>
>>>>
>>>> ---------- Forwarded message ----------
>>>> From: Lisa Snider < = EMAIL ADDRESS REMOVED = >
>>>> To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
>>>> Cc:
>>>> Bcc:
>>>> Date: Tue, 24 Mar 2020 07:47:47 -0300
>>>> Subject: Re: [WebAIM] VPAT version for AODA Hi Sudheer,
>>>>
>>>> Currently, the AODA Information and Communications Standard is
>>>> based on WCAG. So the regular VPAT will do for it. However, look
>>>> for the ICS Review that hasnt been put into the final revised
>>>> version (phase 2 particularly)... the government may or may not accept that Review.
>>>>
>>>> Cheers
>>>>
>>>> Lisa
>>>>
>>> [snip]
>>>
>>>
>> >> >> archives at http://webaim.org/discussion/archives
>> > > > archives at http://webaim.org/discussion/archives
>

From: L Snider
Date: Sun, Mar 29 2020 7:24AM
Subject: Re: VPAT version for AODA
← Previous message | No next message

VPATS in my experience are used in education, governments, large
corporations, libraries, etc. In my experience, almost every VPAT has
been problematic. I make my own VPATS for clients that are very
different.

Cheers

Lisa

On Wed, Mar 25, 2020 at 5:04 PM < = EMAIL ADDRESS REMOVED = > wrote:
>
> I've questioned the validity and usefulness of VPATs.
>
> After all, the V stands for "voluntary." And when using GSA's template, the author can write just about any gibberish or BS they want.
>
> There's no mandated testing or evaluation done by the government; they take the word of the vendor as stated in the VPAT.
>
> And surely no one is surprised that the PDF is not tagged. So many PDFs from "authorities" are not accessible, such as the WCAG and PDF/UA standards from the ISO.
>
> Gah!
>
> — — —
> Bevi Chagnon, founder/CEO | = EMAIL ADDRESS REMOVED =
> — — —
> PubCom: Technologists for Accessible Design + Publishing
> consulting ' training ' development ' design ' sec. 508 services
> Upcoming classes at www.PubCom.com/classes
> — — —
> Latest blog-newsletter – Accessibility Tips at www.PubCom.com/blog
>
> -----Original Message-----
> From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of Philip Kiff
> Sent: Wednesday, March 25, 2020 3:17 PM
> To: = EMAIL ADDRESS REMOVED =
> Subject: Re: [WebAIM] VPAT version for AODA
>
> Errrg. Just a quick follow-up, I noticed that on the page with the link I sent, there is a note about how these might not be "perfectly accessible," and that you provide a link to a document to help users sort through such issues, entitled "Reporting Conformance to ICT Accessibility Standards":
> https://www.itic.org/resources/vpat/ReportingConformancetoICTAccessibilityStandards-July2019.pdf
>
> Unfortunately, when I downloaded that PDF file, I discovered that it is not a tagged PDF. I would recommend that your team also take the time to make that PDF accessible in order to help improve the usefulness of your VPAT offerings.
>
> Still sincerely,
>
> Philip Kiff.
>
> On 2020-03-25 15:10, Philip Kiff wrote:
> > I'm curious about this as well. In fact, I didn't even realize that
> > there was a VPAT that might theoretically be used to make a claim
> > about compliance with the AODA or WCAG. I had always thought of the
> > VPAT as something related to requirements of the US government and
> > Section 508.
> >
> > Here in Ontario in Canada where the AODA applies, I can't say that
> > I've EVER seen anyone make reference to a VPAT other than in the
> > context of compliance with U.S. regulations. But maybe I've just been
> > out of the loop on these things?
> >
> > Lastly, Mitchell, I noticed a couple problems and limitations with the
> > sample VPAT documents currently available from the ITI site here:
> > https://www.itic.org/policy/accessibility/vpat
> >
> > First, these are not formatted using the current MS Word docx file
> > format? I would recommend updating all files to using current docx
> > format. A user of such a form can't even run the rudimentary, but
> > still useful, built-in MS Word accessibility checker without upgrading
> > the file format to docx.
> >
> > Second, they contain font sizes that I consider too small to be
> > considered accessible in a default context (11 point Calibri). I would
> > recommend reformatting the documents to use a minimum 12-point font
> > size. Possibly use Legal-size paper (landscape orientation) instead of
> > Letter-size paper if you want to preserve more space for user input?
> >
> > Lastly, I'm not sure that Microsoft Word is even the best format for
> > this kind of file. Is this what everyone in the US is filling in when
> > they talk about VPATs? It seems to me that this is actually a fillable
> > form, and as such, especially given the number of tables and use of
> > subheadings within individual tables, I wonder if these VPAT files
> > might not be better formatted as accessible PDF forms? Or maybe that
> > is what you intend consumers of these files to do with them?
> > Regardless, on first impression, I have to say that they don't
> > immediately inspire me to start jumping in to use them for AODA
> > compliance.
> >
> > I would welcome any corrections or clarifications on all this,
> > however, as I really don't know hardly anything about VPATs, and
> > that's why I'm wondering.
> >
> > With sincere curiosity,
> >
> > Philip Kiff
> > D4K Communications
> >
> > On 2020-03-25 01:33, Mitchell Evan wrote:
> >> Hi Logan,
> >>
> >>> I'd like to chime in and state that if this is related to AODA,
> >>> the City
> >> of Ottawa will not accept a VPAT as it still isn't relevant to us. We
> >> have vendors submit assessments utilizing the WCAG-EM Tool.
> >>
> >> I agree the WCAG-EM Report Tool
> >> <https://www.w3.org/WAI/eval/report-tool/#!/ > can produce excellent
> >> WCAG reports, but I'm curious — what aspects of VPAT 2.x
> >> <https://www.itic.org/policy/accessibility/vpat> have been
> >> problematic? If the WCAG section in VPAT hasn't worked well for
> >> Ottawa's needs, then I'd like to understand what's lacking and see if
> >> we can get it fixed, either in the VPAT template itself or in its
> >> instructions for vendors.
> >>
> >> The WCAG edition of VPAT and the International edition of VPAT might
> >> be new to some folks here. They are meant to help buyers and
> >> regulators compare accessibility reports from different vendors
> >> easily, while vendors shouldn't have to rewrite the same
> >> accessibility findings in multiple report formats.
> >>
> >> (Multiple languages, that's another matter.)
> >>
> >> Cheers,
> >> Mitchell
> >>
> >> Mitchell Evan
> >> +1 (510) 375-6104
> >> = EMAIL ADDRESS REMOVED =
> >> Twitter @mitchellrevan
> >> https://www.linkedin.com/in/mitchellrevan/
> >>
> >> -----Original Message-----
> >>> From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf
> >>> Of Logan Trafford
> >>> Sent: Tuesday, March 24, 2020 2:28 PM
> >>> To: = EMAIL ADDRESS REMOVED =
> >>> Subject: Re: [WebAIM] WebAIM-Forum Digest, Vol 180, Issue 25
> >>>
> >>>
> >>> I'd like to chime in and state that if this is related to AODA, the
> >>> City of Ottawa will not accept a VPAT as it still isn't relevant to
> >>> us.
> >>> We have
> >>> vendors submit assessments utilizing the WCAG-EM Tool.
> >>> In terms of PDF, while the legislation only states they need to be
> >>> WCAG
> >>> 2.0 AA conformant, assuming you consider a PDF as part of the "web
> >>> content"
> >>> definition, the better standard you should use is PDF U/A, Those
> >>> documents can be validated by using either the free PAC (PDF
> >>> Accessibility Checking
> >>> Tool) or the free CommonLook Validator tool.
> >>>
> >>> Logan Trafford
> >>> Web Accessibility Coordinator
> >>> City of Ottawa
> >>>
> >>>
> >>> On Tue, Mar 24, 2020 at 2:03 PM
> >>> < = EMAIL ADDRESS REMOVED = >
> >>> wrote:
> >>>
> >>>> Send WebAIM-Forum mailing list submissions to
> >>>> = EMAIL ADDRESS REMOVED =
> >>>>
> >>>> To subscribe or unsubscribe via the World Wide Web, visit
> >>>> http://list.webaim.org/mailman/listinfo/webaim-forum
> >>>> or, via email, send a message with subject or body 'help' to
> >>>> = EMAIL ADDRESS REMOVED =
> >>>>
> >>>> You can reach the person managing the list at
> >>>> = EMAIL ADDRESS REMOVED =
> >>>>
> >>>> When replying, please edit your Subject line so it is more specific
> >>>> than "Re: Contents of WebAIM-Forum digest..."
> >>>> Today's Topics:
> >>>>
> >>>> 1. Re: VPAT version for AODA (Lisa Snider)
> >>>> 2. Re: VPAT version for AODA (Sudheer Babu)
> >>>> 3. Re: VPAT version for AODA (Karlen Communications)
> >>>>
> >>>>
> >>>>
> >>>> ---------- Forwarded message ----------
> >>>> From: Lisa Snider < = EMAIL ADDRESS REMOVED = >
> >>>> To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
> >>>> Cc:
> >>>> Bcc:
> >>>> Date: Tue, 24 Mar 2020 07:47:47 -0300
> >>>> Subject: Re: [WebAIM] VPAT version for AODA Hi Sudheer,
> >>>>
> >>>> Currently, the AODA Information and Communications Standard is
> >>>> based on WCAG. So the regular VPAT will do for it. However, look
> >>>> for the ICS Review that hasnt been put into the final revised
> >>>> version (phase 2 particularly)... the government may or may not accept that Review.
> >>>>
> >>>> Cheers
> >>>>
> >>>> Lisa
> >>>>
> >>> [snip]
> >>>
> >>>
> >> > >> > >> archives at http://webaim.org/discussion/archives
> >> > > > > > > archives at http://webaim.org/discussion/archives
> > > > > >
> > > >