E-mail List Archives
Thread: How to make ESRI Emergency map data accessible
Number of posts in this thread: 5 (In chronological order)
From: Levine, Suzanne
Date: Thu, Dec 03 2020 10:26AM
Subject: How to make ESRI Emergency map data accessible
No previous message | Next message →
Hello WebAIM List folks,
We are using ESRI ArcGIS Web AppBuilder to create an Emergency Portal for the public. It will include maps to communicate during "blue-sky" days as well as specific emergencies (e.g. widespread power shut offs, fires, earthquakes, flooding...). There are many, many attribute layers that may or may not include important accessible information. Depending on the emergency will depend on which layers are turned on. (e.g. flooding, road closures, etc.) There may be more than one map (still being discussed). We want to provide the information in an accessible format for screen reader users, people who are in a panic and may be easily overwhelmed, folks who may not have the latest mobile technology to use the map, etc.
Do any of you have experience with the best solution? Or can recommend resources, site example or? What is the best way to manage such huge volume of attribute information?
thank you for your time,
Suzanne
Suzanne Levine
digital accessibility program manager
County of Marin
Department of Information Services and Technology
Phone: (415) 473-2260
Cell: (415) 717-7109
Email Disclaimer: https://www.marincounty.org/main/disclaimers
From: Jonathan Avila
Date: Thu, Dec 03 2020 11:56AM
Subject: Re: How to make ESRI Emergency map data accessible
← Previous message | Next message →
Hi, my recommendation in addition to standard WCAG advice would be to:
* Allow users to filter data layers to focus on certain aspects
* Allow users to request information by a location or address
* Allow users to get directions or steps by putting in two or more locations - e.g. safe route in text directions to evacuate, etc.
* Present information in different ways not just visually
* Allow users to control presentation of the data - for example - colors/patterns, etc. that work for them
* Support large text - generally in maps as you zoom in text can get smaller or stay the same size.
* Support symbols/legends - both text and non-text options.
* Other supports
Jonathan
-----Original Message-----
From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of Levine, Suzanne
Sent: Thursday, December 3, 2020 12:26 PM
To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
Subject: [WebAIM] How to make ESRI Emergency map data accessible
CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you recognize the sender and know the content is safe.
Hello WebAIM List folks,
We are using ESRI ArcGIS Web AppBuilder to create an Emergency Portal for the public. It will include maps to communicate during "blue-sky" days as well as specific emergencies (e.g. widespread power shut offs, fires, earthquakes, flooding...). There are many, many attribute layers that may or may not include important accessible information. Depending on the emergency will depend on which layers are turned on. (e.g. flooding, road closures, etc.) There may be more than one map (still being discussed). We want to provide the information in an accessible format for screen reader users, people who are in a panic and may be easily overwhelmed, folks who may not have the latest mobile technology to use the map, etc.
Do any of you have experience with the best solution? Or can recommend resources, site example or? What is the best way to manage such huge volume of attribute information?
thank you for your time,
Suzanne
Suzanne Levine
digital accessibility program manager
County of Marin
Department of Information Services and Technology
Phone: (415) 473-2260
Cell: (415) 717-7109
Email Disclaimer: https://www.marincounty.org/main/disclaimers
From: Lucy GRECO
Date: Thu, Dec 03 2020 1:02PM
Subject: Re: How to make ESRI Emergency map data accessible
← Previous message | Next message →
spoke to them a few years back and they were working on adding
accessibility features and it looked pretty interesting but i don't know
how far they got with it. I reached out just a few months ago but don't
think my contact got back to me. i would reach out to them and please let
us all know how it goes. i would be willing to look at your work to see how
it works during your develop
ment as i am very curious lucy
Lucia Greco
Web Accessibility Evangelist
IST - Architecture, Platforms, and Integration
University of California, Berkeley
(510) 289-6008 skype: lucia1-greco
http://webaccess.berkeley.edu
Follow me on twitter @accessaces
On Thu, Dec 3, 2020 at 10:56 AM Jonathan Avila < = EMAIL ADDRESS REMOVED = >
wrote:
> Hi, my recommendation in addition to standard WCAG advice would be to:
> * Allow users to filter data layers to focus on certain aspects
> * Allow users to request information by a location or address
> * Allow users to get directions or steps by putting in two or more
> locations - e.g. safe route in text directions to evacuate, etc.
> * Present information in different ways not just visually
> * Allow users to control presentation of the data - for example -
> colors/patterns, etc. that work for them
> * Support large text - generally in maps as you zoom in text can get
> smaller or stay the same size.
> * Support symbols/legends - both text and non-text options.
> * Other supports
>
> Jonathan
>
> -----Original Message-----
> From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of
> Levine, Suzanne
> Sent: Thursday, December 3, 2020 12:26 PM
> To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
> Subject: [WebAIM] How to make ESRI Emergency map data accessible
>
> CAUTION: This email originated from outside of the organization. Do not
> click links or open attachments unless you recognize the sender and know
> the content is safe.
>
>
> Hello WebAIM List folks,
> We are using ESRI ArcGIS Web AppBuilder to create an Emergency Portal for
> the public. It will include maps to communicate during "blue-sky" days as
> well as specific emergencies (e.g. widespread power shut offs, fires,
> earthquakes, flooding...). There are many, many attribute layers that may
> or may not include important accessible information. Depending on the
> emergency will depend on which layers are turned on. (e.g. flooding, road
> closures, etc.) There may be more than one map (still being discussed). We
> want to provide the information in an accessible format for screen reader
> users, people who are in a panic and may be easily overwhelmed, folks who
> may not have the latest mobile technology to use the map, etc.
>
> Do any of you have experience with the best solution? Or can recommend
> resources, site example or? What is the best way to manage such huge volume
> of attribute information?
>
> thank you for your time,
> Suzanne
>
> Suzanne Levine
> digital accessibility program manager
>
> County of Marin
> Department of Information Services and Technology
> Phone: (415) 473-2260
> Cell: (415) 717-7109
>
> Email Disclaimer: https://www.marincounty.org/main/disclaimers
> > > at http://webaim.org/discussion/archives
> > > > > >
From: accessible.engineering@gmail.com
Date: Thu, Dec 03 2020 7:12PM
Subject: Re: How to make ESRI Emergency map data accessible
← Previous message | Next message →
I've also been working with them over the past few years. Lots of talk, I've
seen no action.
Best,
David
-----Original Message-----
From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of Lucy
GRECO
Sent: Thursday, December 3, 2020 12:02 PM
To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
Subject: Re: [WebAIM] How to make ESRI Emergency map data accessible
spoke to them a few years back and they were working on adding
accessibility features and it looked pretty interesting but i don't know how
far they got with it. I reached out just a few months ago but don't think my
contact got back to me. i would reach out to them and please let us all know
how it goes. i would be willing to look at your work to see how it works
during your develop ment as i am very curious lucy Lucia Greco Web
Accessibility Evangelist IST - Architecture, Platforms, and Integration
University of California, Berkeley
(510) 289-6008 skype: lucia1-greco
http://webaccess.berkeley.edu
Follow me on twitter @accessaces
On Thu, Dec 3, 2020 at 10:56 AM Jonathan Avila < = EMAIL ADDRESS REMOVED = >
wrote:
> Hi, my recommendation in addition to standard WCAG advice would be to:
> * Allow users to filter data layers to focus on certain aspects
> * Allow users to request information by a location or address
> * Allow users to get directions or steps by putting in two or more
> locations - e.g. safe route in text directions to evacuate, etc.
> * Present information in different ways not just visually
> * Allow users to control presentation of the data - for example -
> colors/patterns, etc. that work for them
> * Support large text - generally in maps as you zoom in text can get
> smaller or stay the same size.
> * Support symbols/legends - both text and non-text options.
> * Other supports
>
> Jonathan
>
> -----Original Message-----
> From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of
> Levine, Suzanne
> Sent: Thursday, December 3, 2020 12:26 PM
> To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
> Subject: [WebAIM] How to make ESRI Emergency map data accessible
>
> CAUTION: This email originated from outside of the organization. Do
> not click links or open attachments unless you recognize the sender
> and know the content is safe.
>
>
> Hello WebAIM List folks,
> We are using ESRI ArcGIS Web AppBuilder to create an Emergency Portal
> for the public. It will include maps to communicate during "blue-sky"
> days as well as specific emergencies (e.g. widespread power shut offs,
> fires, earthquakes, flooding...). There are many, many attribute
> layers that may or may not include important accessible information.
> Depending on the emergency will depend on which layers are turned on.
> (e.g. flooding, road closures, etc.) There may be more than one map
> (still being discussed). We want to provide the information in an
> accessible format for screen reader users, people who are in a panic
> and may be easily overwhelmed, folks who may not have the latest mobile
technology to use the map, etc.
>
> Do any of you have experience with the best solution? Or can recommend
> resources, site example or? What is the best way to manage such huge
> volume of attribute information?
>
> thank you for your time,
> Suzanne
>
> Suzanne Levine
> digital accessibility program manager
>
> County of Marin
> Department of Information Services and Technology
> Phone: (415) 473-2260
> Cell: (415) 717-7109
>
> Email Disclaimer: https://www.marincounty.org/main/disclaimers
> > > archives at http://webaim.org/discussion/archives
> > > > archives at http://webaim.org/discussion/archives
> >
http://webaim.org/discussion/archives
From: accessible.engineering@gmail.com
Date: Thu, Dec 03 2020 7:52PM
Subject: Re: How to make ESRI Emergency map data accessible
← Previous message | No next message
ESRI and the screen reader I use don't work well together.
Looking forward to other insights,
David
-----Original Message-----
From: WebAIM-Forum < = EMAIL ADDRESS REMOVED = > On Behalf Of
Levine, Suzanne
Sent: Thursday, December 3, 2020 9:26 AM
To: WebAIM Discussion List < = EMAIL ADDRESS REMOVED = >
Subject: [WebAIM] How to make ESRI Emergency map data accessible
Hello WebAIM List folks,
We are using ESRI ArcGIS Web AppBuilder to create an Emergency Portal for
the public. It will include maps to communicate during "blue-sky" days as
well as specific emergencies (e.g. widespread power shut offs, fires,
earthquakes, flooding...). There are many, many attribute layers that may or
may not include important accessible information. Depending on the emergency
will depend on which layers are turned on. (e.g. flooding, road closures,
etc.) There may be more than one map (still being discussed). We want to
provide the information in an accessible format for screen reader users,
people who are in a panic and may be easily overwhelmed, folks who may not
have the latest mobile technology to use the map, etc.
Do any of you have experience with the best solution? Or can recommend
resources, site example or? What is the best way to manage such huge volume
of attribute information?
thank you for your time,
Suzanne
Suzanne Levine
digital accessibility program manager
County of Marin
Department of Information Services and Technology
Phone: (415) 473-2260
Cell: (415) 717-7109
Email Disclaimer: https://www.marincounty.org/main/disclaimers
http://webaim.org/discussion/archives